7mm Narrow Gauge

The items on this page have been produced to help in the production of prototypical models of the Welshpool and Llanfair in 7mm particularly using the Dorset Models kits.

We have produced some etched brake levers and lever guards for the Dorset Models wagons but these can also be used on other kits and on scratchbuilt items. Also we have some 7mm transfers which cover a wide range of the wagon numbers used on the W&L. For loco and coach transfers the modeller is advised to use the HMRS Methfix sheet.

Also available are some track baseplates for use with the Karlgarin code 82 rail, reference C82/7. There are 200 baseplates on each etch plus some to make slide plates for turnouts.

These items may not always be in stock due to their restricted appeal but if there are going to be delays we will advise you by email.

7mm waterslide transfers for W&L wagons. Transfers for both brakevans, 4 vans, 2 GWR cattle wagons, 2 cattle wagons, 12 timber wagons and 16 open wagons.

Note: stock limited and may be subject to delay.

200 7mm flat bottom rail baseplates for use with Karlgarin C82/7 rail. Also contains 12 baseplates for slide chairs on turnouts.

Note: stock limited and may be subject to delay.